Sangean Electronics DT-300V Portable Radio User Manual


 
12
13
14
5
11
8
11
13
14
until the desired station is reached or pressing and holding the Tuning
Control or until the station is reached.
C. Setting Presets Manually
Turn on receiver by pressing On/Off Button .Select desired band by
pressing Band Selector Button .Tune to the desired station using the
Manual or Scan Tuning Method as described above. When the desired
station is reached press Memory Button . "Memo" flashes in the LCD
display and a suggested preset position flashes. Press Memory Button
again if flashing position is suitable and desired station will appear in the
position selected. If you would prefer to locate desired station in a position
other than that suggested use Memory Selection Button or to move
to chosen postion.After selection is complete press Memory Button again to
complete Selection.You may store a total of 9 stations for each band Original
stations are eliminated or exchanged when a new