Filter
Top Products
System reset
If your radio fails to operate correctly, or some digits on the display are
missing or incomplete carry out the following procedure.
1. Press and hold in the Info button until the display shows the
software version.
2. Press the Info button twice the display will show System reset.
3. Press in and release the Select button to select System reset.
4. If DAB was used last then a "Quick scan" of the DAB band will be
performed, otherwise a "Quick scan" will be carried out the next time
the DAB band is selected.
Select L band channels for Canada (DCR-209 only)
L band channels in Canada and Europe are different. Initial setting for
L band channels of this receiver is for Europe (Quick scan 10A-LK and
Full scan 5A-LW). For Canada, following steps should be taken to select
suitable L band channels in Canada (Quick scan L1-L23 and 5A-L23 full
scan).
1. Press and hold the Info button until display shows software version.
2. Press the Info button twice, the display will show L band.
3. Press Select button to change the L band channels LA-LW (for
Europe) to be L1-L23 (for Canada).
15