Filter
Top Products
1514
Connecting yepp to PC with USB cable
When USB driver is not Installed automatically,
refer to next page.
8
When USB driver is installed, "SAMSUNG YP-N30” will appear in
[System Properties] ➝ [Device Manager] as shown in the picture
to the right.
7
N
N
o
o
t
t
e
e
:
:
How to check USB driver
How to check USB driver
Windows 98,ME:
Control Panel ➝ System ➝ Device Manager ➝
Universal Serial Bus controllers/SCSI and RAID controllers
Windows 2000:
Control Panel ➝ System ➝ Hardware ➝
Device Manager
Windows XP:
Control Panel ➝ System ➝ Hardware ➝
Device Manager
USB connect cable
Plug one end of the USB cable into the
USB port on the back of the PC.
3
Insert the battery into the yepp and turn
on the power.
4
Slide down the bottom cover of the player.
Plug the other end of the USB cable
into the USB port on the right side at the bottom.
● PC may temporarily malfunction if you unplug the
USB cable from PC while yepp Explorer is initiating or
executing a command.
5
USB driver is installed a message saying that it is
searching for a new device. You may not see the
display screen during installation.
Go to the device manager to check that installation
has been successfully completed.
6
N30-America 3/21/03 3:19 PM Page 14