Filter
Top Products
13
Connecting the player to PC
12
1 Connect the USB cable to the USB port on your PC.
2 Connect the other end of the USB cable to the USB cable connection port on
the bottom of the player.
● If you disconnect the USB cable from your PC while implementing a
command or initializing during USB driver installation, your PC may not
function correctly.
● When the software installation is complete, connect the player to the computer
and use it as the following pages show.
3 The USB driver is installed with a message saying that it is searching for a new
device. You may not see the display screen during installation.
Go to the device manager (see next page) to check that installation has been
successfully completed.
4 Upon installation of the USB driver "Samsung YP-C1 USB Device" will appear
in your PC's control panel under [System Properties] ➝ [Device Manager].
I Connecting the player to PC with the USB cable
Continued...
Connecting the player to PC
USB Cable
2 Follow the instructions in the window to complete the installation.