Filter
Top Products
CHAPTER ONE
Connecting The Set Top Box
1
1
13
Connecting Antennas
This section shows how to connect a cable TV with or without a cable box, and how to
connect an indoor or outdoor antenna.
1
Indoor/Outdoor Antenna: You may
need a 75Ω adaptor or a combiner, as
shown in the illustration to the right.
2
Cable TV without a Cable Box: If you
have a cable TV and do not use a cable box,
connect the cable to ANT/CABLE IN on the
rear of the Set-Top Box.
3
Cable TV with a Cable Box: If you have
a cable box, connect as shown in the
illustration to the right.
NOTES
• If your antenna has separate leads for VHF/UHF signals, you will need to purchase a
combiner and connect it as shown in illustration above.
• The Set-Top Box can receive DTV signals in the event that a local cable provider is passing
8VSB through on their system.(8VSB is the RF modulation format utilized by the DTV(ATSC)
digital television standard to transmit digital bits over the airwaves to the home consumer.)
• When Receiving Digital Cable Signal : If your cable service signal does not comply
with the ATSC requirement, this product may not operate properly.