Filter
Top Products
ENG-70
VCR O
PERATIONS
Using the Tape Counter
The tape counter:
- Indicates the elapsed time in the play and record modes (hours, minutes and seconds).
- Is reset when a cassette is inserted in the DVD-VCR.
- Allows you to easily find the beginning of a sequence.
- If the remaining time is to be calculated correctly, you must indicate the type of cassette being used.
1
Insert a cassette in your DVD-
VCR. To set the tape counter
to zero at the beginning of a
sequence:
- Press the INFO. button twice
to display the counter
- Press the
CLEAR button
when you want to set the
tape counter to zero.
2
When you are ready,
- Start playback or Recording.
- Press the (Stop) button.
-To fast-forward or rewind to
the sequence at which the
counter was set to zero,
press the the
(
Forward) or
(Rewind) button.
- Some DVD-VCR information, such as the counter, can be
displayed on the television screen.
Press the INFO. button:
- Once to display the current function, recording speed and
counter.
-Twice to display the counter only.
- Three times to display the time remaining on the cassette.
-Four times to clear the display.
00743A V8600_eng3 3/11/05 2:18 PM Page 70