Filter
Top Products
English
5
Hold Function
While the Hold switch on your yepp player is on
Buttons on the yepp won't work. Each time a button is
pressed, “Hold” will appear for a short time on the display
only the buttons on your remote controller will work.
While the Hold switch on your remote controller is on
The mark will appear on the display panel. None of
the buttons on your remote control will work. The buttons
on your yepp will work.
Repeating Tracks/Section
Press the “A
↔
B” button of your remote controller to
repeat the track or section that you selected. Setting 'Repeat
Track' needs a minimum of two seconds of play time.
1 Press the A ↔ B button of your remote control at the
start point of the track or section that you want to
repeat. Then, 'B' blinks on the display panel.
2 Press this button again at the end point of the track or
section that you want to repeat.
NNoottee The section from point A to point B that you selected will
automatically be repeated. To cancel this function, press
the A
↔B button again. While tracks/sections are
repeated, only the Stop and A
↔B buttons work.
Setting the Modes
Each time the EQ/REP button of your remote controller is
pressed and held, the modes will change in the order of
REP, ALL, SHU and INT.
◆ REP mode : Repeats current track.
◆ ALL mode : Repeats all the tracks.
◆ SHU mode : Enables random playback.
◆ INT mode : Enables you to repeat the first 10
seconds of the tracks saved (for 10
seconds each).
Using the Equalizer
Each time the EQ/REP button of your remote controller is
pressed, the equalizer modes will be changed in the
order of
Classic, Jazz, Rock and Normal.
Normal mode is not indicated on the panel.
Using the 3D Sound
Press the 3D buttonto add Surround 3D sound effect to
four different modes (
Normal, Classic, Jazz, Rock).
The surround 3D sound is available only in the MP3
mode.
1_eng_nd 00/12/5 1:47 PM Page 5