Filter
Top Products
Using the Bookmark Function
The Bookmark function lets you select parts of a DVD or VCD (MENU OFF mode) so that you
can quickly find the section at a later time.
Using the Bookmark Function (DVD/VCD)
1
1
During play, press the BOOKMARK button on the
remote. The Bookmark icons will be displayed.
2
2
Use the LEFT/RIGHT buttons to move to the
desired bookmark icon.
3
3
When you reach the scene you want to mark,
press the ENTER button. The icon will change to
a number (1, 2, or 3).
4
4
Press the BOOKMARK button to turn off the
display.
Recalling a Marked Scene
1
1
During play, press the BOOKMARK button on
the remote.
2
2
Use the LEFT/RIGHT buttons to select a
marked scene.
3
3
Press the PLAY/PAUSE buttons to skip to the
marked scene.
Clearing a Bookmark
1
1
During play, press the BOOKMARK button
on the remote.
2
2
Use the LEFT/RIGHT buttons to select the
bookmark number you want to delete.
3
3
Press the CLEAR button to delete a bookmark
number. Press the BOOKMARK button to turn
off display.
NOTE
• Up to three scenes may be
marked at a time.
• When in VCD 2.0 mode (MENU
ON mode), this function does not
work.
• Depending on the disc, the
Bookmark function may not work.
ADV
ADV
ANCED
ANCED
FUNCTIONS
FUNCTIONS
Using the Zoom & 3D Sound Functions
Using the Zoom Function (DVD/VCD)
1
1
During play or pause mode, press the
ZOOM button on the remote.
A square will be displayed on screen.
2
2
Use the UP/DOWN or LEFT/RIGHT
buttons to select the part of the screen you
want to zoom in on.
3
3
Press the ENTER button.
- During DVD play, press ENTER to zoom in
2X/4X/2X/Normal in order.
- During VCD play, press ENTER to zoom in
2X/normal in order.
Using the 3D Sound Function
The simulated surround effect depends on the disc
contents. If you connect the unit to your stereo
system, you can enhance sound quality and
produce a greater surround effect.
This feature is useful when you are using the DVD
player with a two channel stereo through the
analog outputs.
(Discs which are recorded with LPCM or DTS will
not work. When the DIGITAL OUTPUT is set to BIT
STREAM in the SETUP MENU, the 3D Sound
function will not work.)
1
1
During play, press the 3D button.
The 3D SOUND mark will be displayed on
screen. (Be sure the DIGITAL OUTPUT is set to
PCM.)
2
2
Press the UP/DOWN buttons to turn the 3D
Sound feature on or off.
NOTE
• 3D Sound is possible only on discs
recorded using DOLBY SURROUND or
DOLBY DIGITAL. However, some of
these discs do not contain rear channel
sound signals.
• Depending on the disc, the Zoom and
3D Sound function may not work.
30 31