Filter
Top Products
DESCRIPTION CONT.
REAR PANEL
• Power Jack: Connects to the Rolls Power Adapter.
• Stereo Outputs RCA: Unbalanced RCA outputs.
1/8" (3.5mm): Stereo Line/Headphone Output
CONNECTION
Connect the Rolls Power Adapter to the power jack of the HR72 RMS270/
RMS272, and to an AC outlet with the proper voltage.
Connect the RCA or 1/8" (3.5 mm) Left and Right outputs to a mixer, amplifier, or
other audio device.
OPERATION
Press in the POWER button to apply power to the HR72/RMS272, the display
reads "LOAD" then reads "OPEN" and "NO dISC" if there is no disc inside. If
there is a CD disc or MP3 disc inside, the HR72RMS272 scans the disc and
will display the the disc type, folder (if MP3), track and time information. The
disc then begins to play. Adjust the LEVEL control for a comfortable listening or
proper recording volume
BASIC FUNCTIONS
IMPORTANT: DO NOT FORCE DISCS INTO THE DISC OPENING. PLACE
THE DISC INTO THE OPENING AND CAREFULLY PRESS IN UNTIL THE
HR72RMS272 DISC LOAD MECHANISM TAKES THE DISC.
When a disc is inserted, the display reads "CLOSE", then LOAd", then disc type,
folder (if MP3) track and time info. The disc then begins to play.
- Playing tracks
To to temporarily pause the Play mode, press the PLAY/PAUSE button.
To advance to the next track, press the FWD button, to go back to a previous
track press the REV button. To stop disc operation, press the STOP button.
- Fast Foward / Rewind
To fast forward through a track, press and hold the FWD button. Release when
you have reached the time you wish to begin play again.
To rewind (reverse) through a track, press and hold the REV button. Again, re-
lease when you want to begin play.
- Repeat / Shuffle Play
When the HR72/RMS272 is first powered up, the Repeat mode is set to ALL. The
disc will play through all folders (MP3) and tracks, then repeat continuously. To
play one track continuously, press the RPT/SHUF button until the Track Play Sta-
tus reads REPEAT 1. If the REPEAT status is on alone (MP3 mode) the current
folder will repeat.
For Shuffle (random) play, press the RPT/SHUF button until the Track Play Sta-
tus reads SHUFFLE.
If the Track Play Status displays none of the above, the disc will play through one
time and stop.
CD DISC OPERATION
• Disc Play
If a CD type disc is inserted into the HR72/RMS272, the Disc Type Indicator will
read "CD", and the number of tracks will display. The disc will then begin to play.
• CD Track Progamming
Press the PROGRAM button. Press either the FWD or REV to select the track
you wish to program. Press RPT/SHUF ENTER to program that track. Repeat
this process to program more tracks. When finished, press PLAY to start the
program. The MEMORY indicator will display.
MP3 DISC OPERATION
Insert an MP3 formatted disc. The HR72/RMS272 will read the disc and display
the number of folders, total tracks, and time status.
MP3 track play, pause, FWD track, REV track, and Repeat/Shuffle functions all
operate the same as the CD Disc Operation.
• Folders
Since MP3 formatted discs are often arranged in folders (ie: the same way fold-
ers are arranged on a computer), the HR72/RMS272 provides a way to access
these folders individually. Press the FOLDER button to access the folders, then
use the FWD and REV buttons to advance to the next folder, or return to a previ-
ous folder. If the unit is in Play mode, the first track of the selected folder will play.
• MP3 Programming
Much like programming track in CD mode, tracks may be programmed in MP3
mode, with the addition of programming Folders.
Press the PROGRAM button to enter MP3 Programming mode. Use the FWD
and REV buttons to select the tracks you wish to program. Press RPT/SHUF
ENTER to program the selected track. To advance through Folders quickly, press
the FOLDER button.
When all desired tracks have been programmed, press PLAY.
OPERATION CONT.
3
4
STEREO
OUTPUTS
12 VDC
+
-
R
L
MADE IN USA
SERIAL NUMBER
MODEL HR72
www.rolls.com