Filter
Top Products
If you need any further advice, please call our Technical Helpline on :-
020 8758 0338 (Mon-Fri)
Listening to the radio
FM operation
1. Set the Function switch to the 'Radio' position.
2. Select 'FM' using the Waveband switch.
3. Adjust the Volume control until a hissing sound is heard.
4. The Telescopic aerial which is only operational on FM, should be
fully extended.
5. Carefully tune to the desired station using the Tuning control.
6. Angle and rotate the Telescopic aerial to a position giving the best
reception. A knuckle joint at the base of the aerial allows this
movement and an angle of 45 degrees will usually be satisfactory.
The FM band is marked in Megahertz (MHz).
7. To receive stereo broadcasts set the Mono/Stereo to the 'Stereo'
position the Stereo indicator will light up. If the station being
received is weak some hiss may be audible, to reduce the hiss set
the Mono/Stereo switch to the 'Mono' position to return to mono
operation.
8. Adjust the Deep bass boost switch to the required position.
9. To switch off the radio set the Function switch to the 'Tape Off'
position.
Volume
Tuning
4
FM
88 94 96 100 104 106 108
MHz
88-108MHz
540
150
600
180160 200
800
220 240
100 0
260
120 0 1600
KHz
KHz
MW
LW
540 -16 00kHz
150- 26 0 kH z
3 Band Stereo Radio Cassette Recorder
SC 9911
PROVI DED B Y
On
Off
SC9911 Issue 2.pmd 2/5/2007, 11:39 AM5