Filter
Top Products
6
Earphones
The lead connecting earphones to your radio acts as an aerial when
plugged into the Earphone socket. The lead should be extended as much
as possible to increase reception.
1. Plug the earphones into the Earphone Socket on the top of your
radio.
2. Check the Volume Level icon shows that the volume is not too loud
and place the ear-pieces into your ears.
Do not switch on the radio with the earphones connected and inserted
in your ear. Loud noises can damage your hearing.
Using the AC adaptor
The AC adaptor for use with your RD-14 should provide 3 volts DC output
at 350mA centre pin positive (Roberts type PU14).
1. Insert the adaptor plug into the DC socket on the right side of your radio.
Plug the adaptor into a standard 13A mains socket outlet. Whenever
the adaptor is used the batteries are automatically disconnected.
2. The AC adaptor should be disconnected from the mains supply and
the radio when not in use.
RD14 final version.indd Sec1:6RD14 final version.indd Sec1:6 01/09/2005 09:29:0101/09/2005 09:29:01