Filter
Top Products
If you need any further advice, please call our Technical Helpline on :-
020 8758 0338 (Mon-Fri)
4
Mains operation
Only for use in dry conditions. If using your radio outside in
damp or rainy conditions the internal battery supply should be
used.
1. Place your radio on a flat surface.
2. Open the Mains lead storage compartment (located on the rear
of your radio) by sliding the catch in the direction of the arrow.
Unwind the mains lead.
3. Position the mains lead in the cut out in the lower right side of the
compartment door. Close the door.
4. Insert the mains plug into a wall socket and switch on the wall socket.
Battery operation
1. Unscrew the battery compartment fixing screw located on the
underside of your radio.
2. Open the Battery compartment and insert 6 LR20 (D size)
batteries into the compartment. Take care to ensure all batteries are
inserted with the correct polarity as shown inside the battery
compartment. Replace the battery cover and tighten the battery
compartment fixing screw.
3. Reduced power, distortion and a ‘stuttering’ sound are all signs that
the batteries may need replacing.
4. If the radio is not to be used for any extended period of time it is
recommended that the batteries are removed from the radio.
We would recommend for economy that your radio is used on the
mains whenever possible with battery operation for occasional or
stand-by use only.