Filter
Top Products
Operating your radio - Shortwave
1. Switch on your radio by sliding the Power On/
Off switch to the On position.
2. Slide the Waveband selector switch to the
SW position.
3. Select the required SW band using the SW
band selector switch.
For information on the most appropriate
shortwave band refer to shortwave guide
or BBC website at http://www.bbc.co.uk.
4. Adjust the Volume control until a hissing
sound is heard.
5. Fully extend the Telescopic aerial.
6. Rotate the Tuning control to select the de-
sired station. The Tuning indicator will light
when the station is correctly tuned. On SW the
Tuning scale is marked in Megahertz (MHz).
7. Adjust the Volume to the required setting.
8. To switch off your radio slide the Power On/
Off switch to the Off position.
1
2
4
6
7
8
3
7