Filter
Top Products
If you need any further advice, please call our Technical Helpline on :-
020 8758 0338 (Mon-Fri)
Operation via an AC adaptor (not supplied)
The AC adaptor for use with the R9958 should provide 3 volts DC output
at 300 mA centre pin positive.
1. Insert the adaptor plug into the DC in socket on the left hand side of
your radio.
2. Plug the adaptor into a standard 13A mains socket outlet. Whenever
the adaptor is used the batteries are automatically disconnected.
The AC adaptor should be disconnected from the mains supply and
the radio when not in use. The unit is only fully isolated from the mains
if the AC adaptor is removed from the wall socket.
• IMPORTANT: The mains adaptor is used as the means of
connecting the radio to the mains supply. The mains socket used
for the radio must remain accessible during normal use. In order
to disconnect the radio from the mains completely, the mains
adaptor should be removed from the mains socket outlet
completely.
• IMPORTANT: The R9958 should not be used with the mains adaptor
in a bathroom, shower or poolside environment. Use on batteries
only.
6