Filter
Top Products
If you need any further advice, please call our Technical Helpline on :-
020 8758 0338 (Mon-Fri)
1. Switch on your radio by pressing the On/
Off button.
2. Select the required waveband by repeat
pressing of the Band button. The wave-
band selected will appear in the display. On
FM fully extend the Telescopic aerial. On
MW and LW rotate your radio for best
reception.
3. Press and hold down either the Tuning + or
- buttons until the frequency in the display
begins to change rapidly. Release the but-
ton.
4. Your radio will scan the selected wave-
band, stopping each time it finds a station
of sufficient strength. Adjust the Volume
control to the required level.
2
3
3
2
4
Operating your radio - search tuning
12