Roberts Radio Ecologic 3 Portable Radio User Manual


 
If you need any further advice, please call our Technical Helpline on :-
020 8758 0338 (Mon-Fri)
20
Software version
The software display cannot be altered and is just for your reference.
1. To view the software version on the display press and hold in the Info
button for two seconds.
2. Press the Tuning Up or Down buttons until the display shows
"Sw version" on the lower line. The version number is then shown on
the upper line of the display. After a few seconds the display will revert
to normal tuning mode.
System reset
If your radio fails to operate correctly, or some digits on the display are
missing or incomplete carry out the following procedure.
1. Press and hold down the Info button for 2 seconds.
2. Press the Tuning Up or Down buttons until the display shows "Factory
reset" on the lower line then press and release the Select button to
select System reset.
4. Press the Select button once more and a full reset will be performed.
All presets and station lists will be erased.
5. After a system reset a scan of the DAB band will be performed.
In case of malfunction due to electrostatic discharge, reset the product
(reconnection of power source may be required) to resume normal
operation.
If a problem persists our technical staff would be pleased to offer
any assistance on operating the radio. Our technical helpline
number is 020 8758 0338.
1
3,4
2
2
1
2
2