Filter
Top Products
Operating your radio - DAB
1. Carefully extend the telescopic aerial.
2. Press the On/Off button to switch on your radio. The display will show
"ROBERTS" for a few seconds and then "Welcome to DAB".
3. If this is the fi rst time the radio is used a quick scan of the UK Band III
DAB channels will be carried out. The display will show "Welcome to
DAB". If the radio has been used before the last used station will be
selected.
4. During the scanning process, as new stations are detected the station
counter on the right hand side of the display will increase and stations
will be added to the list. The lower line of the display shows a bar-graph
indicating progress of autotune.
5. When the scanning is completed the fi rst station (in numeric-alpha
order 0...9...A....Z) will be selected.
6. If the station list is still empty after the scan your radio will display "No
stations available".
7. If no signals are found it may be necessary to relocate your radio to
a position giving better reception.
2
7