Roberts Radio DreamTime2 Clock Radio User Manual


 
If you need any further advice, please call our Technical Helpline on :-
020 8758 0338 (Mon-Fri)
26
Clock display
1. When your clock radio is in standby mode the time and day will be
displayed. The time is always shown using a 24 hour clock format.
Display backlight dimmer
The brightness of the display can be adjusted when the radio is in standby
or when the unit is in use.
1. In order to adapt the intensity of the display to suit the ambient room
lighting, press the Dimmer button on your clock radio to select the
dimmer brightness from High-Mid-Low and an almost off 'night-time'
setting.
Software version
The software display cannot be altered and is just for your reference.
Ensure your clock radio is switched on.
1. Press and release the Menu button.
2. Press the Tuning Up or Down buttons until 'SW VER' appears on
the display.
3. Press and release the Select button. The display shows the software
information.
4. Press and release the Menu button to exit the software display.
1
2
3
1,4
2