Filter
Top Products
27
Setting the clock manually
Normally your clock radio will set its clock automatically using the DAB
radio signal. If no DAB signal is available and you need to set the time
manually, please follow the procedure shown below.
1. Press the On / Standby button to switch on the clock radio. If necessary
press and release the Mode button to put the radio into DAB or FM
mode.
2. To set the clock time, press the Menu button to enter the setup menu.
"MANUAL" will appear on the display.
3. Press the Tuning Up or Down button until "CLOCK" appears on the
display. Press and release the
Select button.
4. Press the Tuning Up or Down button until "MANU CLK" appears on
the display.
5. Press and release the Select button to enter the manual setting
procedure. The hour digits will then flash on the display.
6. Press the Tuning Up
or Down buttons to set the desired hour.
7. Press and release the
Select button to enter the hour setting.
8. The minute digits will then flash on the display. Press the Tuning Up
or Down buttons to set the desired minute.
2
3-7
3-8
3-8