Filter
Top Products
If you need any further advice, please call our Technical Helpline on :-
020 8758 0338 (Mon-Fri)
1
0FF ·
ON ·
ADJ ·
12
Setting alarm times
The alarms can be set to wake you by a buzzer, CD or the radio. Your
CD clock radio has 2 separate alarms which can be set to activate at
different times.
Setting Alarm 1
1. Slide the Alarm 1 function switch to the 'Adj' position.
2. Press the B.Skip button to set minutes and the F.Skip button to
set the hour. Release the buttons when the correct time is reached.
The clock uses a 12 hour display with a PM indicator. Ensure that
the correct 12 hour cycle is selected.
3. Return the Alarm 1 function switch to the 'Off' position. The
display will revert to showing time and the Alarm 1 indicator will
go off.
Note: Incorrect display will result if both the Alarm function switches
are set to the 'Adj' position.
Setting Alarm 2
1. Slide the Alarm 2 function switch to the 'Adj' position.
2. Press the B.Skip button to set minutes and the F.Skip button to
set the hour. Release the buttons when the correct time is reached.
The clock uses a 12 hour display with a PM indicator. Ensure that
the correct 12 hour cycle is selected.
3. Return the Alarm 2 function switch to the 'Off' position. The
display will revert to showing time and the Alarm 2 indicator will
go off.
1
0FF ·
ON ·
ADJ ·
1
3
2
0FF ·
ON ·
ADJ ·
1
2
0FF ·
ON ·
ADJ ·
3
2
2
2
2
CR9986 Rev 1.pmd 5/19/2005, 8:28 AM13