Filter
Top Products
If you need any further advice, please call our Technical Helpline on :-
020 8758 0338 (Mon-Fri)
Switching on
1. Place your clock radio on a flat surface. Plug the power cord into the
wall socket and switch on.
2. After a few seconds the time, day and date will set automatically.
Your clock radio is fitted with a long life back-up battery to maintain
the factory set time, day and date. Your clock radio will automatically
reset to the correct time should the power source be interrupted. It
will also automatically adjust for summer/winter time.
See section on Back-up battery on page 15 .
Should the time, date or year require adjustment follow the procedure
shown in the next sections.
6
Setting the time manually
1. Press and hold down the Time button.
2. Whilst holding down the Time button press the Up or Down
buttons to set the time. Release the buttons when the correct time
is reached.
The clock uses a 12 hour display with a PM indicator. Ensure that
the correct 12 hour cycle is selected.
1
2
2
Untitled-1 1/24/2003, 11:42 AM7