Roberts Radio CR9952 Clock Radio User Manual


 
7
Listening to the Radio
1. Switch on the clock radio by pressing the On/Off button
2. Slide the FM/MW switch to the required waveband.
3. Tune in to the desired station by rotating the Tuning control.
The station frequency is indicated in the Tuning scale.
The Wire aerial located on the rear of your clock radio is for FM
reception. The wire should be fully extended and positioned for
optimum reception.
For MW reception there is a built in ferrite aerial. Rotate your clock
radio to the position giving the best reception.
4. Adjust the volume by rotating the Volume control.
5. To illuminate the clock face whilst listening to the radio, press the
Light/Off button: this will give a Green backlight.
6. To change the static Green backlight to a cycling Green/Blue/
Red backlight, depress the Light Mode button and release.
The cycle interval is approximately 15 seconds.
7. To return to a static Green backlight, depress the Light Mode
button once more.
8. To turn off the Backlight at any time press the Light/Off button.
9. The radio can be switched off by pressing the On/Off button.
5
1
2
3
4
6 7
8
9