Filter
Top Products
If you need any further advice, please call our Technical Helpline on :-
020 8758 0338 (Mon-Fri)
10
Listening to the Radio
1. Switch on your CD clock radio by pressing the Power button. The
Power indicator LED will light.
2. Slide the Function switch to the required waveband.
3. Tune in to the desired station by rotating the Tuning control. The
station frequency is indicated in the dial scale.
The Wire aerial located on the rear of your CD clock radio is for
FM reception. The wire should be fully extended and positioned for
optimum reception.
For MW reception there is a built in ferrite aerial. Rotate your CD clock
radio to the position giving best reception.
4. Adjust the volume by rotating the Volume control.
5. On the FM waveband if the station being received is weak some hiss
may be audible, to reduce the hiss slide the Function switch to FM
position. The FM stereo indicator will be removed from the
display.
6. The radio can be switched off by pressing the Power button. The
Power indicator will switch off
1
3
2
6
4
5
cr9946 instruction book.PMD 4/19/2004, 4:49 PM11