Filter
Top Products
9
Operating your radio - search tuning
1. Switch on your clock radio by pressing the On/Off button.
2. Select the required waveband by pressing the Band button. The
waveband selected will appear in the display. On FM fully extend
the pigtail aerial from the rear of your clock radio. On MW rotate
your radio for best reception.
3. Press and hold down either the Tuning Up or Down buttons until
the frequency in the display begins to change rapidly. Release the
button.
4. Your radio will scan the selected waveband, stopping each time it
finds a station of sufficient strength. Adjust the Volume control
to the required setting.
5. To search for additional stations repeat the above procedure.
Search tuning may be stopped by a single press on either the
Tuning Up or Down buttons.
6. Press the On/Off button to switch off your radio.
Weekend alarm cancel
1. Your clock radio can be set to automatically cancel alarms at the
weekend.
2. Press the WEC button until the WEC symbol appears in the display.
The alarm will now only sound on weekdays.
3. To switch off the weekend cancel function press the WEC button
until the WEC symbol is removed from the display
2
1
6
3
3
2
4
5
5
3