Roberts Radio CR9933 Clock Radio User Manual


 
If you need any further advice, please call our Technical Helpline on :-
020 8758 0338 (Mon-Fri)
Off
Off
10
Setting the alarms to wake to buzzer
1. Set the alarm time as previously described. Set the appropriate
Alarm selector switch to the 'Buzzer' position. The corresponding
Alarm indicators will light.
2. The buzzer alarm will sound every day at the preset time for 59
minutes. To switch off the alarm until the next day press the Off
button. To switch off the alarms permanently set the Alarm selector
switches to the 'Off' position.
To make a distinction between alarm 1 and alarm 2 the alarm
signals have a different sound pitch:
Alarm 1 = lower pitch alarm signal
Alarm 2 = higher pitch alarm signal
Setting the alarms to wake to radio
1. Set the alarm time as previously described. Set the appropriate
Alarm selector switch to the 'Radio' position. The corresponding
Alarm indicators will light.
2. Ensure that the volume is set to the correct level and the desired
station is tuned in.
3. The radio alarm will operate every day at the preset time for 59
minutes. To switch off the radio alarm until the next day press the
off button. To switch off the alarms permanently set the Alarm
selector switch on both alarm 1 & 2 to the 'Off' position.
1
2
1
2
1
2
3
2
2
1
3