Filter
Top Products
If you need any further advice, please call our Technical Helpline on :-
020 8758 0338 (Mon-Fri)
Erasing a programme
1. Whilst the CD is in STOP, press the Mode button. The Programme
indicator will flash.
2. Press the Stop button to erase the programme. Programmes are
also erased by:- Opening the CD door, moving the Function switch
to the 'Radio' position and if the power supply is interrupted in any
way.
12
Replacing previously programmed tracks
1. Whilst the CD is in STOP, repeatedly press the Mode button until
the display shows the program step you wish to replace.
2. Select the required track using the F.Fwd or F.Rev buttons.
3. Press the Mode button to store the change.
Alarm operation
Your clock radio has three alarm types, CD, Radio and Buzzer. The
alarms gradually increase in volume. This function is known as Progres-
sive Alarm System.
Setting the alarm time
1. Press and hold down the Alarm 1 or Alarm 2 buttons. Whilst holding
down the Alarm 1 or Alarm 2 buttons set the alarm time using the
F.Fwd or F.Rev buttons.
The clock uses a 12 hour display with a PM indicator. Ensure that
the correct 12 hour cycle is selected.