Filter
Top Products
Switching on and setting the time
Before using your clock radio you must first set the correct time.
1. Place the unit on a flat surface. Plug the mains lead into a wall socket
and switch on.
2. The clock display will flash 12:00.
3. Press and hold down the Time Set button.
4. Whilst holding down the Time Set button press the fast forward (Fast),
or slow reverse (Slow) buttons to set the time. Release the buttons
when the correct time is reached. The clock uses a 12 hour display with
a PM indicator. Ensure that the correct 12 hour cycle is selected.
3
PM
1
2
Tuning
FM LWMW
Volume
Min Max
ON
Tim e
Set
Alarm /O ff
F ast
Slow
CR9900 Instruction Book.pm6 24/10/99, 13:444