Filter
Top Products
If you need any further advice, please call our Technical Helpline on :-
020 8758 0338 (Mon-Fri)
Switching on
1. Place your clock radio on a fl at surface. Plug the power cord into the
wall socket and switch on.
2. After a few seconds the time, day and date will set automatically.
Your clock radio is fi tted with a long life back-up battery to maintain
the factory set time, day and date. Your clock radio will automatically
reset to the correct time should the power source be interrupted. It
will also automatically adjust for summer/winter time.
• IMPORTANT: The mains plug is used as the means of connecting
the clock radio to the mains supply. The mains socket used for
the clock radio must remain accessible during normal use. In order
to disconnect the clock radio from the mains, the mains
plug should be removed from the mains socket outlet completely.
See section on Back-up battery on page 15.
Should the time, date or year require adjustment follow the procedure
shown in the next sections.
6
Setting the time manually
1. Press and hold down the Time button.
2. Whilst holding down the Time button press the Up or Down buttons to
set the time. Release the buttons when the correct time is reached.
The clock uses a 12 hour display with a AM indicator. Ensure that
the correct 12 hour cycle is selected.
1,2
2
2