Filter
Top Products
If you need any further advice, please call our Technical Helpline on :-
020 8758 0338 (Mon-Fri)
4
Operation via an AC adaptor (not included)
The AC adaptor for use with the Classic 996 should provide 6 volts DC
output at 300mA centre pin negative.
1. Place your radio on a fl at surface.
2. Plug the mains adaptor into the DC input socket located on the left
hand side of your radio ensuring that the plug is pushed fully into the
socket.
3. Plug the other end of the mains adaptor into a standard 13A mains
socket outlet and switch on the wall socket. Whenever the adaptor is
used the batteries are automatically disconnected.
The AC adaptor should be disconnected from the mains supply and
from the radio when not in use.
IMPORTANT: The mains adaptor is used as the means of connecting the
radio to the mains supply. The mains socket used for the radio must remain
accessible during normal use. In order to disconnect the radio from the
mains completely, the mains adaptor should be removed from the mains
socket outlet completely.