Filter
Top Products
13
Creating an ATS Program
1. Press the ATS button (AUTO TRACK SKIP blinks in
the display).
2. Press the DISC SELECT button or the corresponding DISC
(1-5) buttons to choose a disc.
3. Press TRACK/SEARCH forward or TRACK/SEARCH
backward to choose the first track to
be skipped (the track number and Pr 01 appears in
the display).
4. Press PROGRAM to add the selected track to the ATS
program.
5. Repeat the preceding steps to add more tracks to the ATS
program.
6. Press PLAY/PAUSE to begin playing the ATS program.
Recalling and Editing the ATS Program
Editing the ATS program is a lot like editing a regular
program.
1. Press the ATS button to go to Auto Track Skip mode.
2. Press PROGRAM to move to the next program number
until you get to the programmed track you want to
change.
3. Press DISC SELECT or the corresponding DISC (1-5)
buttons to choose the disc, and then press
TRACK/SEARCH forward or TRACK/SEARCH backward to
choose a replacement track.
4. Press the PROGRAM button to change the current
skipped track to the one you just selected.
The first ATS program number (Pr 01) contains
track 08.
Track 6 is selected to replace track 8 as the first
programmed track to be skipped.
SKIPTRACKAUTO
DISC
SKIPTRACKAUTO
DISC
Clearing the ATS Program
Press the ATS button followed by the CLEAR button
terminates CD play and all selected play modes are then
cancelled.