Filter
Top Products
12
Using the tuner
Tuning Radio Stations
• Press the TUNER function button. Press again to
switch between AM and FM.
• Use the SEEK/SCAN button to find the stronger
radio stations on the FM band in your listening
area.
– Press and release the button to initiate the Seek
mode, which moves through the stations
incrementally. The system will stop tuning on the
next available FM frequency.
– Press and momentarily hold the button to initiate
the Scan mode. The system will automatically stop
and play each radio station it receives strongly for
approximately three seconds. Press the button
again when the system lands on the station you
want to hear.
• Press the FM STEREO button to toggle between
STEREO and MONO modes to help improve
reception.
NOTE: A FM radio station must be transmitting
in stereo for you to receive it in stereo.
• If the STEREO indicator (ST) is fading in and out,
change from FM Stereo to FM Mono to improve
reception.
Storing Stations in Memory
You can preset as many as 32 stations for easy
access.
1. Choose the radio band and station.
2. Press the SET button. The PR on the program
indicator will blink.
3. Press one of the Search buttons (
or ) to
choose the preset number.
4. Press SET again to store the station in memory.
Using the system
Auto preset programming
While in the FM band, your system is capable of
automatically programming into its memory any FM
stations broadcasting in stereo in your area. Simply
press and hold the TUNER button for approximately
one second. “AUTO PRESET PROGRAMMING” will
scan across the display while the mode is active.
When finished, the system will tune to the first
preset station.
NOTE: This feature will overwrite any stored
information already stored in the presets.
Recalling Preset Stations
1. Press the PRESET/TUNE button to activate the
Preset mode.
2. Press the SEARCH button
or to move
through the list of preset stations until you find
the one you want.
Using the CD player
Loading Discs
1. Press the OPEN/CLOSE button to open the CD
compartment drawer.
2. Place the CD(s) into the tray.
3. Press the DISC CHANGE button to rotate the
drawer in order to load a third CD.
Playing Discs
After you get the discs loaded, press the DISC
CHANGE button to select a disc and then push PLAY,
or press the Direct Disc Access button of your choice
and the disc will begin playing once it is in the play
position. The display will show which CD you have
chosen to play, the track number and its running
time.
Press STOP (
) to end disc play.
CD Playing Time
The elapsed time for a track appears in the display
while the track is playing.
3 DISCS DIRECT ACCESS
DISC CHANGE
OPEN / CLOSE
1
2
3
H I G H P E R F O R M A N C E A U D I O S Y S T E M
3
DISC
BASS BOOST
TUNER
TAPE
CD
POWER
SEEK/SCAN
PRESET TUNE
SHUFFLE
FM STEREO
TIMER/CLOCK
INTRO
REPEAT
ATS
PHONES
STOP
DEMO
V
O
L
U
M
E
VIDEO 1•2
EQ BAND
CUSTOM
PLAY/
PAUSE
POP
JAZZ
ROCK