Filter
Top Products
Skip /Search
Press to skip to the previous track.
Press and hold to search backwards in a
track.
Press to skip to the next track.
Press and hold to search forward in a
track.
Pause
Press Play/Pause on the main unit
again to pause playback. The minutes and
secondes flash when interrupted
Stop
Press Stop on the main unit or
Play/Stop on the remote control
during playback to end CD playback.
Lock
Slide control switch on the main unit to
HOLD position to lock the button on the
main unit to avoid accidental activation of
unwanted functions.
The hold icon will show on the dis-
play when the controls are locked.
Do the same to lock the buttons on the
remote control.
NOTE: Remember to slide the
CONTROL switch to ON position to
activate the controls again.
Listening to a CD in your car
(For RP2467 only)
1. Select a power source (either battery
power or the car DC adaptor)
2. Insert the cassette adaptor into the tape
deck and plug the cord into the CD play-
er’s HEADPHONES jack.
3 . Insert a compact disc and press
Play/ Pause button to power on the
unit (180 sec ESP). Press and hold
prog•display while you press Play/Pause
to turn on the unit for 45 sec ESP set-
ting.
Adjust CD player’s volume to a mid level
(make sure the Bass Boost is turned off).
4. Use the car stereo to adjust volume,
tone . Adjust the volume of your CD player
for better volume control.
5. Before ejecting the cassette after you
have finished listening, make sure the car
stereo’s volume is turned down.
THE CD PLAYER
EN
5
THE DISPLAY
1. Random Playback
2. ESP• XTREME - 180 sec ESP
ESP - 45 sec ESP
3. Is displayed when Bass Boost is ON.
Press Bass Boost momentarily to
toggle between Bass Boost 1, Bass
Boost 2 and off.
4. Program mode
5. Repeat entire disc or repeat current
track.
6. Is displayed when the control button is
on HOLD position.
7 Battery Indicator.
Listening to a Compact Disc
Slide the open switch to the right to
open the door. Insert a disc and press
lightly on the centre to lock. Close the
door.
Playback
Press Play/Pause button on the main
unit or Play/Stop on the remote
control to start playback.
Rd DISC will appear in the display. Then,
the total number of tracks and time of
the CD will be displayed. If the disc com-
partment is empty or the disc cannot be
played, No Disc will appear in the display.
The EXTREME SKIP PROTECTION* (EPS)
system prevents sound interruptions
when impacts or vibrations occur. Extreme
skip protection consumes less power and
increases the battery life. Therefore, the
ESP function is always ON.
After many successive impacts, the buffer
might be emptied causing a brief sound
interruption for the memory to reload.
ESP•XTREME (180 seconds buffer) -
Press Play/Pause on the main unit or
Play/Stop on the remote control to
power on the unit. The display will show
ESP•XTREME.
ESP (45 seconds buffer) - For better lis-
tening quality, press prog•display while
pressing Play/Pause to turn the unit
on. The display will show ESP.
THE CD PLAYER
bass boost
1
P
ESP•XTREME
1 3
4 5 6
2 7
EN
6
RP2461_2_3_7_889U EN 12/31/02 11:46 AM Page 10