Filter
Top Products
W
ake function
iPod/iPhone
To control the playback:
1. During playback, press iPod to
pause the playback and press again
to resume.
2. Press << or >> to skip to the
previous or next fi le.
• Press and hold << or >> to search
backward or forward.
3. Press SHUFFLE to play the fi les in
random order in the iPod/iPhone.
Press again to cancel the function
(shows on the iPod/iPhone display).
4. Press REPEAT to select a repeat
playback mode (repeat 1 or repeat
all). Press REPEAT until no repeat
mode is selected (shows on the
iPod/iPhone display) to cancel the
repeat playback.
To charge the iPod/iPhone:
• You may charge the battery of your
iPod/iPhone through the universal
dock for iPod/iPhone while the
unit is turned off (standby mode)
or in the AUX, Radio or iPod
mode. Charging control should be
operated on the iPod/iPhone. It
is not necessary to charge in iPod
mode, unless you are listening to
the iPod/iPhone.
Setting wake time
This unit allows 2 wake times to be set.
1. Press SET on the top of the unit
until a WAKE 1 icon (
, or
) or a WAKE 2 icon ( , or )
fl ashes on the display.
2. Press << or >> on the top of the
unit to set the wake time. The time
decrements or increments follow by
a faster rate when you press and
hold the button.
3. To save and exit the wake setting,
wait for about 5 seconds or press
SET until the clock setting icon (
) is off and the wake setting icons (
/ / or / / ) are either
off or stop fl ashing.
• To check the wake time after
setting, press SET until a WAKE
1 icon (
/ / ) or WAKE 2
icon (
/ / ) fl ashes and
the respective assigned wake time
shows on the display.
Select the wake source
You may choose to wake to radio, alarm
sound or music from iPod/iPhone.
1. Set a wake time (see Setting Wake
Time directions).
If Waking to Alarm (
, ) is
selected:
• The unit is equipped with GRAD-
U-WAKE. The alarm volume will
increase gradually to its maximum
in about 30 to 45 seconds.
• Note that the Alarm mode is not
affected by the volume control. If
you set the wake function with a
low volume setting for the Radio
before going to bed, it is advisable
to use Wake to Alarm mode to
wake you up since the Alarm will be
at a louder volume setting than the
Radio mode.
If Waking to RADIO (
) is
selected:
3. Select a desired wake up radio
channel (refer to “Listening to the
radio”). If no wake up channel is
set, your last listening radio station
will be selected.
4. Adjust the volume to your desired
level.
5. Press OFF to turn off the unit.
To select auxiliary mode:
1. Connect your auxiliary source (e.g.
mp3 player) to the AUX input jack
at the back of the unit with an
audio cable (not supplied).
2. Press AUX to turn on the unit or to
switch to listen to AUX from other
modes.
• The auxiliary mode icon (
)
lights on the display.
Auxiliary source
• Adjust the auxiliary player to mid-
range volume and adjust the master
volume on the unit. Do not turn
the volume of the auxiliary player
too high as this may affect the
sound quality. For other playback
operations, control them on your
auxiliary player.
2. Press WAKE 1 or WAKE 2 to select
a wake mode. A corresponding icon
lights on the front of the unit.
– Wake time 1 by alarm
– Wake time 1 by radio
– Wake time 1 by iPod/IPhone
– Wake time 2 by alarm
– Wake time 2 by radio
– Wake time 2 by iPod/IPhone