Filter
Top Products
10
Connecting to the computer
Player
USB port of your
computer
• Connect the player to your PC as shown.
• The player will turn on automatically and display "USB connected" on the display. The player will appear
as a drive letter on your computer, a Mass Storage Class (MSC) device, and behave as a detachable drive
for file transfer in one or both directions.
• The RCA easyRip
TM
Media Software installer is stored in the player, go to MyComputer in the Start
menu, nd and open the drive letter associated with the player (i.e. LYRA) and then double-click the
rcaeasyrip_setup le to launch the installer.
• The software installer can be deleted from the player after installation to free up more storage spaces.
• It might take several seconds for the player to be detected. Click Refresh in My Computer or
Windows Explorer to make sure the player has been detected.
• The player is capable of transferring files at USB 2.0. If USB 2.0 port is available on your
computer, use it to connect to your player. The player is still backward compatible with the older USB
1.1 ports. However, you will not be able to take full advantage of the potential speed increase.
• IMPORTANT: Don’t disconnect the USB cable to the PC or the player during the software installation.
* The latest software can be downloaded from www.rcaaudiovideo.com.
Charging the player
The player charges automatically every time you connect it to your computer. To fully charge the player,
make sure your computer is on and the device is connected for at least 3 hours. Refer to the battery level
icon on the display to check the battery level. Recharge the player when the icon is empty.