Filter
Top Products
General Controls
21
Before You Begin
The following example illustrates what you should do before operating your player.
1. These instructions presume you’ve already done the followings:
• Installed all necessary applications.
•Transferred music from your computer to the player.
• Allowed your device to charge for at least 3 hours while connected to the
computer.
2. Updated your device software using the Auto Updater application if it was installed.
See page 12 on updating your device (You must have an active Internet connection).
3. If you haven’t unplugged the player from your computer, detach the USB cable from
the player, follow the procedure below depending on the operating system
(Windows XP or 2000) your computer is using.
In Windows 2000, you must stop the device before unplugging it. Click the
icon (the Unplug or Eject hardware icon) from the system tray and select the USB
Mass Storage device for the drive associated with the player, and click STOP. See
the Windows Help for details about the Unplug or Eject Hardware topic.
4. Connect the headphones to your player.
5. If your player isn’t already on, turn it on by pressing the ON/OFF button. The main
navigation menu appears.
Note: You can reset your player at any time if there is a problem by pressing and
holding the ON/OFF button for 10 seconds.