Filter
Top Products
8
RADIO OPERATION
Warning: To protect your hearing, set
VOLUME to MIN before you turn on
the radio.
1. Set FUNCTION to RADIO to
turn on the radio.
2. Set BAND to FM, AM, SW1, or
SW2 for the desired band.
Note: Select SW1 or SW2 for
shortwave signals.
3. Adjust VOLUME to the desired
listening level.
4. Adjust TUNING to the desired
station.
Notes:
• The AM antenna is built in.
For the best AM reception,
rotate the CTR-98.
• For the best FM and SW
reception, fully extend the
telescoping antenna and
swivel it to the position that
produces the best reception.
• If you tune to a shortwave sta-
tion, adjust FINE TUNING for
the best reception.
5. Adjust TONE for the desired
bass/treble sound. Turn it
toward LOW to enhance the
bass sound, or toward HIGH to
enhance the treble
6. Set FUNCTION to RADIO OFF/
TAPE to turn off the radio.
14-728.fm Page 8 Wednesday, June 30, 1999 5:18 PM