Radio Shack 63-995 Clock Radio User Manual


 
63-995
05A02
Printed in China
RadioShack Corporation
Fort Worth, Texas 76102
5'66+0)"6*'"&#6'"#0&"
6+/'
1. Open the cover.
±ý
2. Hold down
TIME SET
Ð
until the clock
sounds a long beep and the hour digits
flash.
3. Repeatedly press (or hold down)
8
or
9
to set the hour.
±ý
4. Press
TIME SET
Ð
to store the hour. The
minute digits flash.
5. Repeat Steps 3 and 4 to set the minute,
year, month, and date.
6. Press
TIME SET
Ð
to finish setting the
clock. The clock beeps once then the
time reappears.
±
5'66+0)"6*'"#.#4/"
6+/'
You can set the clock to sound an alarm to
remind you of a daily event (such as a
meeting).
±
1. Hold down
ALARM SET
Ì
until the clock
beeps.
'(0&&
'(0&&'(0&&
'(0&&
or the preset alarm time
appears. The hour digits flash.
2. Repeatedly press (or hold down)
8
or
9
/
12/24
to set the alarm hour.
3. Press
ALARM SET
Ì
. The minute digits
flash.
4. Repeatedly press (or hold down)
8
or
9
/
12/24
to set the alarm minute.
5. Press
ALARM SET
Ì
to store the alarm
time. The clock beeps once, the alarm
turns on, and
Ì
appears.
At the preset alarm time, the alarm sounds
for 1 minute then automatically turns off. To
silence the alarm sooner, press any key
(except
SNOOZE & LIGHT
and
8
).
±
If you do not want the alarm to sound again
the next day, press
ALARM ON/OFF
to turn off
the alarm.
Ì
disappears.
±
75+0)"5011<'
To temporarily silence the alarm for 5
minutes,
press
SNOOZE & LIGHT
or
8
to
turn on the snooze function.
Î
appears.
After 5 minutes, the alarm sounds for 1
minute. You can press any key to temporarily
silence the alarm and have the alarm sound
four times every five minutes.
To turn off the snooze cycle,
press
ALARM
ON/OFF
Í
twice.
To cancel the snooze function before it
begins,
press
ALARM ON/OFF
Í
once.
Î
and
Ì
disappear.
%*#0)+0)"6*'"&')4''"
(14/#6
Repeatedly press
C/F
Ï
to switch the
temperature from Fahrenheit (
°
F) to Celsius
(
°
C) format on the display.
The thermometer automatically measures the
temperature and updates its display every
minute.
4'5'66+0)"6*'"%.1%-
If the clock displays segmented digits, does
not work properly, or locks up, you can reset
it by using a pointed object, such as a
straightened paper clip, to press
RESET
on
the back of the clock. The clock beeps once.
Resetting the clock erases all stored
information.
%#4'
Keep the clock dry; if it gets wet, wipe it dry
immediately. Use and store the clock only in
normal temperature environments. Handle
the clock carefully; do not drop it. Keep the
clock away from dust and dirt, and wipe it
with a damp cloth occasionally to keep it
looking new.
5'48+%'"#0&"4'2#+4
If your clock is not performing as it should,
take it to your local RadioShack store for
assistance. Modifying or tampering with the
clock’s internal components can cause a
malfunction and might invalidate its warranty.
52'%+(+%#6+105
Power ...................................... Two AAA Batteries
Clock Accuracy .............................
±
0.67 Sec./Day
Temperature Accuracy .......................
±
2
°
F (
±
1
°
C)
Operating Temperature .................... 16
°
F to 128
°
F
(–9
°
C to 54
°
C)
Battery Life ......................................... 5000 Hours
Dimensions (HWD) ....... 3
1
/
4
× 3
3
/
16
×
15
/
16
Inches
(83
× 81 × 24 mm)
Weight (Without Batteries) .......... 31.75 oz (900 g)
Specifications are typical; individual units might
vary. Specifications are subject to change and
improvement without notice.
±
"016'"
±
"
Setting the Date and Time
All the setting controls are on the back of the
clock.
While setting the time, if you do not press a
key for about 30 seconds, the clock returns
to the current time/temperature display.
When you set the date, the clock
automatically sets the day of the week.
To switch between the 12– and 24– hour
time formats, press
9
/
12/24. In the 12–
hour format,
F
FF
F appears for a PM hour.
If you press ALARM SET
Ì
, C/F, or
ALARM ON/OFF
Í
during the time setting,
the clock automatically returns to the
previous setting.
Setting the Alarm
While setting the alarm time, if you do not
press a key for about 30 seconds, the clock
returns to the current time display.
Pressing SNOOZE & LIGHT or
8
during
the alarm time activates the snooze function.
When you close the cover to store the clock,
the setting controls are exposed. To avoid
turning off the preset alarm time by
inadvertently touching ALARM ON/OFF
Í
,
press ALARM SET
Ì
until the alarm icon
appears.