Filter
Top Products
6
Setup
7
Setup
n Notes:
The Charge Indicator lights red during charging, and goes out when the battery is
fully charged.
Both AC power and vehicle power can be used for charging the built-in battery.
When fully charged, the TV can operate about 150 minutes in AV IN mode and
about 120 minutes in TV mode.
Press the tab
and pull to slide
out the tray
n Battery Notes:
Dispose of batteries promptly and properly. Do not burn or bury them.
Use only fresh batteries of the required size and type.
If you do not plan to use the remote control for a long time, remove the battery.
Batteries can leak chemicals that can damage electronic parts.
Keep button-cell batteries away from children. Swallowing them can be fatal.
4 Enjoy the portable TV
1. Press G to turn on the TV. The Power Indicator lights green.
2. Press INPUT to select TV mode.
3. Press CH+ and CH– to select the previous or next channel.
n Note: You must scan for available analog and digital channels when you set up your
TV. If you do not scan for channels, the CH+ and CH– buttons will not function. See
“Setting up Channels” on page 13 for more information.
3 Use the remote
Your remote comes with a
battery installed. Remove
the plastic tab before using
the remote.
When the battery is low,
replace it with another
CR2025 3V battery. The
positive (+) side faces the
back of the remote.