Filter
Top Products
4
Preparation
ˆ
Preparation
CONNECTING TO AC POWER
Plug the clock radio’s power cord into a standard AC outlet. As
soon as you connect AC power, the display turns on and BAT-
TERY SENTINEL on the front of the clock radio lights.
Caution:
The clock radio’s AC power cord is equipped with a
polarized plug to prevent electric shock. One blade on the
cord’s plug is wider than the other and the plug only fits an out-
let one way. If you cannot easily insert the plug, turn it over and
try again. Do not force it.
INSTALLING A BACKUP BATTERY
To keep the clock running for up to 8 hours and the alarm
sounding for up to 10 minutes during an AC power failure, in-
stall a 9-volt battery (not supplied) in the battery compartment.
For the longest life, we recommend a RadioShack alkaline bat-
tery.
Caution:
Use only a fresh battery of the required size and rec-
ommended type.
Notes:
• BATTERY SENTINEL on the front of the clock radio lights if
there is either no battery installed or the installed battery
requires replacement.
• To prevent unnecessary drain on the battery, plug in the AC
power cord then install the battery.
12-1630.fm Page 4 Tuesday, May 9, 2000 1:31 PM