Filter
Top Products
StorNext File System Tuning
Windows Memory Requirements
StorNext File System Tuning Guide 27
The more cvnodes that there are encached on the client, the fewer trips
the client has to make over the wire to contact the FSM.
Each cvnode is approximately 1462 bytes in size and is allocated from the
non-paged pool. The
cvnode cache is periodically purged so that unused
entries are freed. The decision to purge the cache is made based on the
Low, High, and Max water mark values. The 'Low' default is 1024, the
'High' default is 3072, and the 'Max' default is 4096.
These values should be adjusted so that the cache does not bloat and
consume more memory than it should. These values are highly
dependent on the customers work load and access patterns. Values of 512
for the
High water mark will cause the cvnode cache to be purged when
more than 512 entries are present. The cache will be purged until the low
water mark is reached, for example 128. The
Max water mark is for
situations where memory is very tight. The normal purge algorithms
takes access time into account when determining a candidate to evict
from the cache; in tight memory situations (when there are more than
'max' entries in the cache), these constraints are relaxed so that memory
can be released. A value of 1024 in a tight memory situation should work.