PYLE Audio PLD162 Portable Multimedia Player User Manual


 
If it appears that your DVD unit is faulty,
first consult this checklist. It may be that
something simple has been overlooked.
Under no circumstances should you
try to repair the player yourself, as
this will invalidate the warranty. Only
qualified service personnel can
remove the cover or service this
player.
NO POWER
If the power supply is connected to the
car accessory circuits, but the engine
is not moving, switch the ignition key
to “ACC”.
Check if the fuse is blown. Then replace
the new fuse.
Check if the on/off button on the front
of the player is set to on.
NO PICTURE
Check if the monitor or TV is switched
on.
Check if select proper mode, such as
Disc Play mode and AV mode.
Check the video connection.
DISTORTED PICTURE
Check the disc for fingerprints and clean
with soft cloth, wiping from centre to
edge.
Sometimes a small amount of picture
distortion may appear. This is not a
malfunction.
COMPLETELY DISTORTED PICTURE
The disc format is not according to the
TV-set used (PAL/NTSC).
NO COLOR IN PICTURE
The disc format is not according to the
TV-set used (PAL/NTSC).
DISC DOES NOT PLAY
Ensure the disc label is upwards.
Clean the disc.
Check if the disc is defective by
trying another disc.
NO SOUND
Check audio connections.
If using a HIFI amplifier, try another
sound source.
DISTORTED SOUND FROM HIFI
AMPLIFIER
Check to make sure that no audio
connections are made to the amplifier
phono input.
THE PLAYER DOES NOT RESPOND
TO THE REMOTE CONTROL
Aim the remote control directly at the
sensor on the front of the player.
Avoid all obstacles which may interfere
with the signal path.
Inspect or replace the remote control
battery.
DISTORTED OR B/W PICTURE
The disc format is not according to the
TV-set used (PAL/NTSC).
NO AUDIO AT DIGITAL OUTPUT
Check the digital connections
Check the Digital Audio menu to make
sure that the digital output is correctly
set.
Check if the audio format of the selected
audio language matches your receiver’s
capabilities.
BUTTONS DO NOT WORK
Press Reset button on the housing of
the DVD unit.
THE RADIO DOES NOT WORK
Check if the antenna cable is connected
firmly.
THE RADIO STATION AUTOMATIC
SELECTION DOES NOT WORK
If the signals are too weak, select a
station manually.
TROUBLE SHOOTING
26