Filter
Top Products
Page. 2
P / N : 570-F88902-01
LOCATION OF CONTROLS
OPERATING INSTRUCTIONS
1. POWER ON/OFF CONTROL
Press the button to turn the power “ON” or “OFF”.
Note : The unit can be turn on by pressing any keys on the panel (except open/close button & disc eject
button). It will help the user who cannot find the power button in dark.
2. BAND SELECTOR
Each time this button is pressed, the radio band is changed. The indication “FM1 BAND”, “FM2 BAND”, “FM3
BAND”, “MW1 BAND” or “MW2 BAND” will appear on the display according to your selection.
3. PRE-SCAN/AUTO-STORE BUTTON
This button allows you to enjoy “Preset Memory Scan” function by pushing it shortly, and “Auto-Store Memory”
function by pushing it more than 2 seconds.
• PS (PRESET MEMORY SCAN) - It calls the memorized station frequencies (from 1-6) automatically every 5
seconds.
• AS (AUTO-STORE MEMORY) - It searches all station frequencies upward and memorize automatically 6
stations by catching the frequency which has scan-stop level, the memorized station is shown on LCD as
“Channel 1 to 6”. After memorizing, auto-store memory function will be changed to “Preset Memory Scan”
function automatically.
4. DISC SLOT
Holding the disc and insert into the disc slot. The disc mechanism will automatically engage into CD/MP3 play
mode.
5. LCD DIGITAL DISPLAY
The unit utilizes a digital type display which shows numerical indication of station FREQUENCY and other
FUNCTIONS.
6. DISPLAY CONTROL / DANCING SPECTRUM MODE SELECTION
This button serves to show available information as following:
-Time
- Track No. / Playing Time (during CD and MP3 mode)
- Directory Name / File Name (during MP3 mode and the file must contain directories or files name written by the
CD writer)
REMARK :
AT ANY TIME, IF THE WIRE IS DISCONNECTED, THE RESET SWITCH MUST BE PRESSED AGAIN BEFORE OPERATE THE
RADIO (REFER TO PAGE 5 FOR DETAIL). OTHERWISE, THE RADIO MAY NOT WORK PROPERLY.
FIGURE A