24"
610mm
17"
432mm
12"
305mm
12.75"
324mm
w/grille
• “Platinum-Class” In-Cabinet performance
• Five Driver, 3-way system utilizes drivers of the T8
• Two crossover compensation switches adjust for
in-cabinet boundary effects or for center channel
applications behind a perforated movie screen
• Tough, textured, matte black fi nish
Frequency Range (-6dB): 32-21,000Hz
Recommended Power: 100-400 Watts
Impedance: 4 Ohms
Sensitivity (1W (2.83V) @1m)
Anechoic Chamber: 87dB SPL
Typical Listening Room: 89dB SPL
Drivers: 2 x 8” Woofers,
2 x 4 1/2” Midranges,
1” Dome Tweeter
Dimensions (W x H x D): 17 x 24 x 12 3/4” (grille on)
17 x 24 x 12” (grille off)
CHS80 High Performance In-Cabinet Speaker
w ww. p sb sp ea k er s. co m
1 8 8 8 7 7 2 0 0 0 0
PSB Speakers reserves the right to change specifications or features without notice.
© 2004 PSB Speakers, a division of Lenbrook Industries Limited.
PSB is a registered trademark of Lenbrook Industries Limited. Printed in Canada 10/04. All rights reserved.
No part of this publication may be reproduced, stored or transmitted in any form whatsoever without the written permission of PSB Speakers.
• Try to install the systems at a height equal to
ear level when seated.
• The Midrange/Tweeter/Midrange array
should always be vertical.
• Open volume in equipment cabinet
surrounding the CHS80 should be lightly
fi lled with fi berglass or acoustical foam to
reduce cavity resonance.
• Don’t recess the system any farther into
cabinet than necessary.
• Confi rm that media center grille frames do
not block sound to any listener, especially of
midranges or tweeter.
• Engage boundary switch when cabinet
mounted.
• Engage “Screen Perforation” switch when
mounted behind a perforated screen.
• All PSB in-cabinet speakers require
accompanying powered subwoofers for
maximum performance.
• All PSB CHS models are compatible with
Platinum C4 and C2 Center Channel
Speakers.
• See manual for more installation hints.
Installation Notes
To Reach US Customer Service dial 1 888 772 0000 ext 4445 or 4342
Note: Depth dimensions exclude rear speaker connectors.
Add 1” plus required wire spacing.