PSB Speakers CHS60 Portable Speaker User Manual


 
20"
508mm
15"
381mm
10.5"
267mm
11.125"
283mm
w/grille
“Platinum-Class” In-Cabinet performance
Five Driver, 3-way system utilizes drivers of the T6
Two crossover compensation switches adjust for
in-cabinet boundary effects or for center channel
applications behind a perforated screen
Tough, textured, matte black fi nish
Frequency Range (-6dB): 38-21,000Hz
Recommended Power: 80-300 Watts
Impedance: 4 Ohms
Sensitivity (1W (2.83V) @1m)
Anechoic Chamber: 87dB SPL
Typical Listening Room: 89dB SPL
Drivers: 2 x 6 1/2” Woofers,
2 x 3 1/2” Midranges,
1” Tweeter
Dimensions (W x H x D): 15 x 20 x 11 1/8” (grille on)
15 x 20 x 10 1/2” (grille off)
CHS60 High Performance In-Cabinet Speaker
w ww. ps bs pe ak er s. c om
1 8 8 8 7 7 2 0 0 0 0
Try to install the systems at a height equal to
ear level when seated.
The Midrange/Tweeter/Midrange array
should be vertical.
Left to Right Speaker span defi nes stereo
stage width. Typically should be wider than
screen.
Open volume in equipment cabinet
surrounding the CHS80 (CHS60) should be
lightly fi lled with fi berglass or acoustical foam
to reduce cavity resonance.
Don’t recess the system any farther into
cabinet than necessary.
Confi rm that media center grille frames do
not block sound to any listener, especially of
midranges or tweeter.
Boundary switch deals with overly “rich”
midrange when cabinet mounted.
“Screen Perforation” switch has a strong
effect and should only be used when the
system is mounted behind a perforated
screen.
See manual for more installation hints.
Installation Notes
PSB Speakers reserves the right to change specifications or features without notice.
© 2004 PSB Speakers, a division of Lenbrook Industries Limited.
PSB is a registered trademark of Lenbrook Industries Limited. Printed in Canada 10/04. All rights reserved.
No part of this publication may be reproduced, stored or transmitted in any form whatsoever without the written permission of PSB Speakers.
To Reach US Customer Service dial 1 888 772 0000 ext 4445 or 4342
Note: Depth dimensions exclude rear speaker connectors.
Add 1” plus required wire spacing.