Filter
Top Products
MOUNTING DEPTH: 59 (2 5/16”)
TWEETER IN FLUSH MOUNTING KIT
UNIT: mm (inches)
DIMENSIONS
182 (7 1/8”)
160 (6 1/4”)
5 (3/16”)
5 (3/8”) 59 (2 5/16”)
22 (7/8”)
90 (3 1/2”)
142 (5 5/8”)
168 (6 5/8”)
54 (2 1/8”)
45 (1 3/4”)
16 (5/8”)
CP65
Woofer ......................................................................6 1/2"
Woofer Cone................................................................Injection
Tweeter ..............................................................3/4” Silk Dome
Surround .....................................................................Rubber
Nominal Input Power..............................................10 ~ 85 Watts R.M.S.
Maximum Input Power ......................................................180 Watts
Impedance....................................................................4 Ohms
Magnet Weight.................................................................15 Oz.
Sensitivity................................................................89 dB/W/m
Frequency Response ...................................................55 ~ 22,000 Hz
Crossover Type................................................................2-Way
SPECIFICATIONS
6
Due to continuing product improvements, design and specifications subject to change without notice.
INTRODUCTION
1
PARTS LIST
GRILLES
SPEAKER WIRES
LENGTH: 3m (9’ 10”)
TWEETER HOUSING ASSORTMENT
DOUBLE SIDED
TAPE
CROSSOVER
MOUNTING SCREWS
TWEETER
MOUNTING HARDWARE
RETAINING CLIPS
MOUNTING
SCREWS
SIZE: 4 x 35mm
Congratulations on your purchase of a Profile state-of-the-art speakers. Your selection of a
Profile car audio product indicates a true appreciation of fine musical reproduction. Whether
adding to an existing system or including your Profile speakers in a new system, you are certain
to notice immediate performance benefits.
Before mounting the speakers, select a location that allows for at least 59 mm (2 5/16”) of
mounting depth. The speaker inside the door must not come in contact with the window when
rolled down. Additionally, the speaker should be out of the way of window cranks and door
handles allowing for normal operation.
FLUSH MOUNT
RETAINING RINGS