Filter
Top Products
polk
technology
8 PERFECTLY MATCHED SUBWOOFERS
PSW125
12" Dynamic Balance composite woofer
Driver creates tight, musical bass.
Downward firing port couples to the room
for more bass impact.
More powerful motor structure for a higher BL
product, (the measure of the motive force applied to
the cone) results in louder, deeper and punchier bass
than previous Polk woofers in this price category.
Klippel Optimized woofer—by using a state-of-the-art
Klippel Distortion Analyzer, Polk engineers were able
to optimize the woofer’s m otor structure, voice coil
alignment and suspension for the best possible
performance even at extreme listening levels.
Compression circuitry limits distortion at
earth-shaking volume levels.
Built-in high current amplifier supplies all the good,
clean power you need for big bass. The PSW125
features a Class A/B Amp.
12" POWEREDSUBWOOFER, 100 WA TTSCONTINUOUS AVERAGE OUTPUT
OVERALL DIMENSIONS:
14 1/2"H X 14 1/4"W X 17"D (36.83CM HX 36.2CMW X 43.18CMD)
OVERALL FREQUENCYRESPONSE: 60Hz -110Hz
SEE SPECIFICATIONS FORMORE DETAILED PRODUCTINFORMATION.
BLACK CHERRY
PSW111
PSW111 compact design is the perfect complement
to Polk TSi Series and tucks easily out of the way.
Dynamic Balance
®
composite 8" driver produces an
incredibly tight, musical bass.
Downward firing port couples to the room for more
bass impact.
Powerful motor structure for a higher BL product,
(the measure of the motive force applied to the cone)
results in astonishingly loud, deep bass from a
surprisingly small enclosure.
Klippel Optimized Woofer—the woofer’s m otor
structure, voice coil alignment and suspension have
been optimized for the best possible performance
even at extreme listening levels.
8" POWEREDSUBWOOFER, 150 WA TTSCONTINUOUS AVERAGE OUTPUT
OVERALL DIMENSIONS:
12 1/8"H X 11"W X13" D (30.79C MH X 27.94CM W X33.02CM D)
OVERALL FREQUENCYRESPONSE: 28Hz -200Hz
SEE SPECIFICATIONS FORMORE DETAILED PRODUCTINFORMATION.
BLACK
PSW111
POWERPORT
®
Polk Audio loudspeakers shatter the boundaries of bass response with patented PowerPort bass venting
technology . Conventional ports have limitations: air turbulence at the mouth of the port can cause “port noise”
and bass output losses of up to 3dB. (A loss of 3dB means that half of your amplifier power is being wasted on
turbulence instead of bass!) The distinctive design of the Polk Audio PowerPort gradually slows air exiting the
port, vastly reducing turbulence, port noise and energy loss. The result is bass that you will feel as well as hear;
bass that reaches out, grabs you by the lapels and shakes you up—for a completely visceral and emotional
movie and music experience. See more about Power Port at www.polkaudio.com/catalog/technology/.
PSW125