PLEASE READ THE FOLLOWING INSTRUCTIONS CAREFULLY BEFORE USING
YOUR DVD PLAYER FOR THE FIRST TIME.
WARNING: Do not play poor quality discs to avoid damaging the lens.
Pre-operation
1. Connect the unit to power supply through the provided AC adaptor.
2. Switch “POWER ON/OFF” to “ON” to turn on the DVD player.
3. Push the OPEN switch on the unit to open the disc tray cover. Put a disc in the
disc tray with printed side up. Close the disc cover. (See below)
4. The player will search disc and play it automatically.
5. Adjust the volume with the VOLUME control on the right panel to the desired level.
6. To turn the player off, switch the POWER ON/OFF on the left panel to OFF.
Basic Operation
Playback Operation
LCD MODE
button
Press the MODE button and then press the + button or
- button to adjust brightness, contrast and color of the
screen.
Press the MODE button and hold it for several seconds
to change the aspect ratio among 16:9,4:3 .
ZOOM
button
For DVD disc, press the ZOOM button to display
the image as 2x-3x-4x-1/2-1/3-1/4-normal size
in sequence.
For JPEG disc, press ZOOM button first, then
press the button to enlarge the picture as
follows: 125%-150%-200%-normal size ; press
the button to reduce the picture as
follows:75%-50%-normal size.
This function is not available for CD disc.
22