Filter
Top Products
- 13 -
Playback Pr eparations
Using the Power Adapter
The DVD player is powered via the switching power adapter or the battery pack (both
are included). Directions for connections are found below:
1. Connect the AC adapter to the DVD player in the slot marked “Power In”.
2. Connect the rabbit joint end of the AC adapter to the power cord.
3. Plug the two-prong end of the power cord to a grounded electrical socket.
4. When you want power down, turn off the player’s power off first, then unplug the
power supply to prevent malfunctions.
Operation
1. Make your power connections.
2. Lift up the screen on the DVD player.
3. Switch “POWER” to the “ON” position.
4. Adjust the volume with the “VOLUME” adjust knob (also adjusts earphone volume).
5. Press the “Open” button to open the disc tray cover.
6. Put disc into the tray house with the printed side up.
7. Gently push down and close the disc cover.