Filter
Top Products
- 20 -
To attach the DVD Player Case to a seat back (Photos 1 & 2):
1. Unzip the main compartment that holds the player; locate the set of rings tucked
inside the top edge of the case (A)
2. Locate the 2 straps with hooks on each end
3. Hook one end of each strap to the rings at the top of the case (A)
4. Criss-cross the straps around the front of the headrest (B) and hook the straps to
a second set of rings on the lower part of the case (C)
5. Tighten up the straps until secured
To suspend the DVD Player Case between 2 bucket seats (Photo
3):
1. Unzip the main compartment that holds the player; locate the set of rings tucked
inside the top edge of the case (A)
2. Locate the 2 straps with hooks on each end
3. Hook one end of each strap to the rings at the top of the case (A)
4. Wrap each strap around the headrest or seat; hook the straps to a second set of
rings on the lower part of the case (C); in some vehicles, the middle rings in the
gusset might work best (D)
5. Tighten up the straps until secured
P
h
Photo 2 Photo 1
Photo 3