Filter
Top Products
38
Dolby Digital Setup (continued)
Video Setup Page
1. Dual Mono
This item is used to set the channel output mode.
Press the or button to highlight this item.
Press the ENT or to enter the item.
It includes stereo, L-Mono, R-Mono and Mix-Mono,
Stereo by default.
Press the or button to choose the proper one.
Press the ENT button to confirm your selection.
Press the direction button to exit this item.
2.Dynamic
This item is used to adjust linear dynamic
compression rate to get different signal
compression effects.
Press the or button to highlight this item.
Press the ENT or to enter the setup of this item.
Then the item will show as the left.
Press the or to choose the proper level.
Press the ENT button to confirm your selection.
Press the direction button to exit this item.
The items included in this sub-menu are shown as
the left.
1.Sharpness
This item is used to adjust the sharpness of the
Screen.
Press the or button to highlight this item.
Press the ENT or to enter the item.
It included High, Medium and Low, Low by default.
Press or button to choose the proper one.
Press ENT button to confirm your selection.
Press direction button to exit this item.
System Setup